VICTRON ENERGY – MultiPlus-II 48/3000/35-32 GX
R 9,772,10
MultiPlus-II 48/3000/35-32 GX
Inverter/Charger with GX inside
An Inverter/Charger with device networking built-in, the MultiPlus-II GX communicates with a solar charger, batteries, and other devices to control a grid-connected, off-grid, or remote power installation. Capable of parallel operation for increased power output, or battery charge rates, the MultiPlus-II GX can also be configured for a three-phase supply. A host of advanced features – such as uninterrupted power supply, setting load limits, and supplementing limited grid-power availability with battery power – can all be controlled straight from your phone or smart device. Remote monitoring is also possible.
Models: 3000VA, 5000VA
Specifications:
- Brand: Victron Energy
- Manufacturer Part Number: PMP482306000
- Continuous output power at 25°C (VA): 3000VA
- Continuous power at 25°C (W): 2400W
- Continuous power at 40°C (W): 2200
- Peak power (W): 5500
- Input voltage (VDC): 38-66V DC
- Output voltage (VAC): 230V /-2%
- Frequency (Hz): 50Hz /-0,1%
- Efficiency: 95
- Zero load power: 11
- Zero load power (AES mode): 7
- Number of DC outputs: 1
- Charge current (A): 35
- Charge characteristics: 4-steps
- Voltage float (V DC): 55,2
- Voltage storage (V DC): 52,8
- Input voltage range: 187-265V AC
- Frequency: 45-65 Hz
- Humidity (non-condensing): max 95%
- Recommended battery capacity (Ah): 100 – 350 Ah
- Three-phase capability: Yes
- Power control: Yes
- Power Assist: Yes
- Transfer switch max (A): 32
- Number of AC inputs: 1
- Number of AC outputs: 2
- Integrated transfer switch: Yes
- Lithium Ion battery compatible: Yes
- Dimensions: H499 x W268 x D141mm
- Weight: 20Kg
- Warranty: 5 Years
A MultiPlus-II with LCD and GX functionality
The MultiPlus-II GX integrates a MultiPlus-II inverter/charger and a GX device with a 2 x 16 character display.
Display and Wi-Fi
The display reads battery, inverter, and solar charge controller parameters.
The same parameters can be accessed with a smartphone or other Wi-Fi-enabled device.
GX device
The integrated GX device includes:
• A BMS-Can interface. This can be used to connect to a compatible CAN-bus-managed battery. Note that this not a
VE.Can compatible port.
• A USB port.
• A Ethernet port.
• A VE.Direct port.
Applications
The MultiPlus-II GX is intended for applications where additional interfacing with other products and/or remote monitoring is required, such as on-grid or off-grid energy storage systems and certain mobile applications.
Parallel and three-phase operation
Only one GX unit is needed in case of Parallel and three-phase operation.
| Weight | 20 kg |
|---|
