VICTRON ENERGY – Phoenix Charger 24/25(2+1)120-240V
R 7,766,85
Phoenix Charger 24/25(2 1)120-240V
Phoenix Charger
Charger
Adaptive 4-stage charge characteristic: bulk – absorption – float – storage. Two full-rated outputs and one 4 Amp output. Universal input 90-265V, 50/60Hz. The Phoenix charger features a microprocessor-controlled adaptive battery management system that can be pre-set to suit different types of batteries. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used.
Models: 12 / 24 Volts
Specifications:
- Brand: Victron Energy
- Manufacturer Part Number: PCH024025001
- Input voltage range (V AC): 90-265
- Input voltage range (V DC): 90-400
- Frequency (Hz): 45-65
- Power factor: 1
- Charge voltage ‘absorption’ (V DC): 28.8
- Charge voltage ‘float’ (V DC): 27.6
- Storage mode (V DC): 26.4
- Charge current house batt. (A) (2): 25
- Charge current starter batt. (A): 4
- Charge characteristic: 4-stage adaptive
- Battery capacity (Ah): 100-400
- Temperature sensor: Yes
- Can be used as power supply: Yes
- Forced cooling: Yes
- Operating temp. range: -20 to 60°C (0 – 140°F)
- Humidity (non-condensing): max 95%
- Dimensions: H350 x W200 x D108mm
- Weight: 3.8Kg
- Warranty: 5 Years
Adaptive 4-stage charge characteristic: bulk – absorption – float – storage
The Phoenix Charger features a microprocessor-controlled ‘adaptive’ battery management system that can be preset to suit different types of batteries. The ‘adaptive’ feature will automatically optimize the process relative to the way the battery is being used.
The right amount of charge: variable absorption time
When only shallow discharges occur (a yacht connected to shore power for example) the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge, the absorption time is automatically increased to make sure that the battery is completely recharged.
Preventing damage due to excessive gassing: the BatterySafe mode
If in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the Phoenix Charger will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached.
Less maintenance and aging when the battery is not in use: the Storage mode
The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.
To increase battery life: temperature compensation
Every Phoenix Charger comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed batteries and/or when important fluctuations in battery temperature are expected.
Battery voltage sense
In order to compensate for voltage loss due to cable resistance, Phoenix Chargers are provided with a voltage sense facility so that the battery always receives the correct charge voltage.
Universal 90-265 V AC input voltage range and also suitable for DC supply (AC-DC and DC-DC operation)
The chargers will accept a 90-400 V DC supply.
| Weight | 3,8 kg |
|---|
